For Employees%3a Install The Follow-me Printer

Posted on |

  1. Step 8: Describe printer. At Printer Name enter Follow-Me. At Description enter Follow-Me. Step 9: Properties. Right-click the Follow-Me printer icon. Click Properties. Step 10: Printer options. Select Printer Options. Set Paper Size to A4. Set Input Slot to Tray 3. Set 2-sided print to 2-sided Print, Flip on Long Edge.
  2. Install the EUR Internet Printer for Windows 64-bit; Install the EUR-Follow-Me Printer for Mac OS X (10.11 or higher) Install the EUR Internet Printer for Mac OS X; Remove the EUR Internet Printer for Windows; Pick up your prints at a Canon printer.
  3. Use Print Deploy: Print Deploy lets you see which printers you can print to, and add other printers. The My printers list shows the printers that have been automatically installed for you. These are likely to be the ones you'll use the most. However, depending on how your system is set up, there might also be other printers you can use.
  1. For Employees: Install The Follow-me Printer Software
  2. For Employees: Install The Follow-me Printer Wireless

After you enable your account at any printer on campus, the next step is to install the driver on your laptop. Afterward, it will show up as a printer on your laptop called “FollowMePrint.” Sending a job to FollowMePrint sends it to a cloud (not a specific printer). The cloud holds the job for 24 hours until you swipe your passport at any printer on campus and “release” (print) the job.

The printer will now install automatically It is possible to add / keep the original print queue for backup purposes. Please follow the same instructions as above, however you will need to enter staffprint-01 FollowMe instead.

Please use the following directions to install the HPU Follow-Me Print system on a Windows or PC computer:

1. Go to this link and download the driver:Download Print Drivers

For Employees: Install The Follow-me Printer Software

For employees: install the follow-me printer windows 10

Note: You will need to unzip (extract) this file and choose Windows Drive and choose 'FollowMePrint.exe' in order for the driver to install.

2. Locate the download from your computer and double click to open. When the Compressed zipped folder comes up select Run.

App

3. A command box will appear and the file will install.

4. Upon completion, a pop-up box will appear asking for your HPU credentials (academeusername and password).

5. Click OK to complete.

6. To verify you are connected, from the Start Menu select “Devices and Printers” to see the 'FollowMePrint' on HPU-Print printer.

As a Windows user, every time you change your password or receive a new passport, you will need to go through these steps again.

For employees: install the follow-me printer video

If your printer connects by a wire, plug it into your device. It'll connect automatically, your PC will download the right drivers, and you can use it right away. To connect a wireless printer, follow these steps:

For Employees: Install The Follow-me Printer Wireless

  1. Select the Start button, then select Settings > Devices > Printers & scanners > Add a printer or scanner.

  2. Wait for it to find nearby printers, then choose the one you want to use, and select Add device. If you want to remove the printer later, just highlight it, andselect Remove.

  3. If you don't see your printer, try to fix the problem by using the steps in Fix printer problems in Windows 10.