Description
The Sixty-Two is the ultimate plug-and-play package supporting two-deck digital vinyl simulation, software controls, two USB ports for easy DJ transitions, onboard beat effects, software effects insert and all the record and playback channels you need. The Sixty-Two Mixer supports both analog and Digital Vinyl Simulation (DVS) playback. Serato DJ software and a printed manual are included, and the mixer is backwards-compatible with Serato Scratch Live. It includes Rane’s ASIO and Core Audio drivers to use with all the other popular DJ and DAW programs.
IMPORTANT NOTE: Once the driver is gone, unplug the Rane Interface and plug it back into a different USB port on your Computer and delete the driver if it shows up again. Do this for ALL USB PORTS on your Computer. Once you have uninstalled all the drivers from every port on your computer, either download the correct driver from your. Now supported with Scratch Live 2.5 MIDI Output Lighting enables the LEDs on your MIDI controller to light up when used with Scratch Live. Rane 62 Does Not Show In Midi With Scratch Live Video We've teamed up with our hardware partners to provide you with some presets for some of the coolest controllers out there.
Rane TTM 57SL users: Before updating to Scratch Live versions 2.4.0 and newer, make sure your Rane TTM 57SL mixer has the latest firmware version installed. Video-SL users: Video-SL is no longer supported in Scratch Live 2.4 and above. Video-SL has been replaced by Serato Video, which is a free upgrade for all existing Video-SL customers. Download Serato Video 1.0.
Direct control of over 40 Serato DJ or Scratch Live software controls.
Each of the two USB ports supports six stereo record and four stereo playback channels.
Two DJs can share the mixer, each running different software, for seamless set changes.
32-bit floating point audio processing sampled at 48 kHz.
Mic/line input on XLR/TRS jack with gain trim, two-band EQ, Flex FX assign and On/Over controls.
Internal Effects Engine with Filter, Flanger, Phaser, Echo, Robot and Reverb effects.
External analog inserts for analog effects processor and USB Insert for software effects.
USB Aux Input for SP-6 sample playback with HP/LP Filter, Headphone Cue, and Flex FX assign.
Magnetic crossfader and channel faders with reverse and contour controls.
Home >DJ Mixers >Rane DJ Mixers >Rane SIXTY-ONE
Rane SIXTY-ONE
Description
Turntablism is alive and more creative than ever. Rane and Serato are proud to be supporting partners in that creativity with the introduction of the Rane Sixty-One and Sixty-Two Mixers for Serato Scratch Live. For more than a decade, artists have chosen innovative Rane instruments to advance their art and three generations of TTM series mixers have been the top pick for many of the world's best performers. These mixers more tightly integrate performers, music, software, and hardware. The artist adds the passion, imagination and skills.
The Sixty-One is a plug-and-play package supporting two-deck digital vinyl simulation, software effects and all the record and playback channels you need.
The Sixty-One Mixer supports both analog and Digital Vinyl Simulation (DVS) playback. The mixer is bundled with Serato Scratch Live and includes ASIO and Core Audio drivers to use other audio programs. Two Serato Control Vinyl Records and two Serato Control CDs are included.
A typical setup includes operation with two Scratch Live DVS channels, SP-6 sample player on an independent USB Aux playback channel and Software effects enabled on the USB digital insert in the FlexFx loop. This setup also allows recording PGM-1 post-fader, PGM-2 post-fader and the Main mix.
The Headphone output is available on both 1/4 inch and 3.5 mm TRS jacks. Cueing can pan between Cue & Main Mix, or Split Cue operation.
PGM Inputs 1-4
The Sixty-One has four stereo analog inputs for PGM 1 through PGM 4. Any of these analog inputs may be set for Phono or Line Input using the PH - CD switches. Any of the four analog inputs may be used for Scratch Live vinyl emulation control. Input 1 or Input 2 may be selected for Scratch Live Virtual Deck 1 control. Input 3 or 4 may be selected for Scratch Live Virtual Deck 2 control. Control input sources are selected in Scratch Live.
Mic Input
The Mic Input accepts an XLR or a balanced or unbalanced 1/4' plug. The Mic has a switchable line level option to connect a wireless receiver.
Analog Outputs
All analog outputs come from the same 'Main Mix' signal. Main and Session outputs each have their own Level control. The Main output is on balanced 1/4' TRS (tip-ring-sleeve) jacks, though unbalanced TS (tip-sleeve) plugs may be used. The Session output is on regular unbalanced RCA jacks. Because all signals are identical, users may use any of these outputs as the 'main' output if a different cable type is required for connection.
COMPUTER REQUIREMENTS:
PLEASE NOTE: These are the minimum requirements to run Scratch Live. For best performance and for use in professional situations we recommend you buy a higher spec computer. We also recommend Intel processors.
- Available 2.0 USB port.
- 1024 x 768 screen resolution.
- 5400 RPM hard drive. 7200 RPM for high-resolution audio playback.
- 2 GB RAM (a large library will like more RAM).
Rane 62 Driver Download
MAC
- Intel 1.83 GHz Core Duo or better.
- OSX 10.5.8 or higher.
WINDOWS
- Intel processor, 2.2 GHz Core Duo or better.
- Windows XP with Service Pack 3 or higher.
- Windows Vista with Service Pack 2 or higher.
- Windows 7, recommended over Vista.
The Sixty-One easily connects up to four turntables or CD players, with an additional Aux input for samplers, instruments or session input, and four more USB playback channels. MIDI controllers can be added with their functions mapped to Scratch Live. All controls on the Sixty-One are MIDI-mappable to software applications that support mapping.
| Analog Inputs | 4 Stereo unbalanced RCA jacks |
| ...Phono or Line level input | Rear panel switches for each input |
| ...Phono Response | RIAA ±1 dB, Gain: 30 dB at 1 kHz |
| ...Max Phono Input | 150 mV |
| ...Max Line Input | 4 Vrms |
| ADCs | 24-bit, 48 kHz; Dynamic range 101 dB A-weighted |
| DACs | 24-bit, 48 kHz; Dynamic range 107 dB A-weighted |
| Digital Signal Processing | 48 kHz, 32-bit floating point |
| USB Audio | Six Stereo Record, Four Stereo Playback |
| 48 kHz, 32-bit floating point | |
| FlexFX Return | Stereo unbalanced 1/4' TS (tip-sleeve) phone jack |
| ... Send | Stereo unbalanced 1/4' TS phone jack |
| Mic Input | Balanced 1/4' TRS & XLR combination jack |
| ...Tone Controls | 2-band, High and Low |
| ...Mic-Line level switch | Choose Line to connect wireless receiver |
| Line Outputs: Frequency Response | 20 Hz to 20 kHz ±0.25 dB, Line in to Line out |
| ...THD+N | <0.01 re 0 dBFS, 20 to 20 kHz, 20 kHz BW |
| ...Unbalanced jacks (RCA & FlexFX) | Maximum 4 Vrms |
| ...Balanced jacks (Main 1/4') | Maximum 8 Vrms |
| Internal Universal Power Supply | 100 to 240 VAC, 50 Hz to 60 Hz, 15 W max |
| USB Power | Mixer is self-powered |
| Unit Size | 13.3' x 10' x 4' (33.8 cm x 25.4 cm x 10.2 cm) |
| ...Weight | 8 lb (3.7 kg) |
| Shipping Size | 7.75' H x 15' W x 19.25' D (19.7 cm x 38.1 cm x 49 cm) |
| ...Weight | 12 lb (5.5 kg) |
Back to DJ Mixers
Rane 62 Driver For Scratch Live
CONTACT US - BEAT A PRICE - GEAR RENTAL - TRACK YOUR PACKAGE - RETURNS / WARRANTY INFOABOUT US - SHIPPING INFO - PURCHASE ORDERS - CUSTOM INSTALLATION - TERMS